LinkIt and TMP175 digital temperature sensor example
In this example we take a look at the TMP175 temperature sensor, connected to a Linkit one and the example will be craeted using the ARduino IDE
Linkit One and TEMT6000 light sensor
TEMT6000X01 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a miniature transparent 1206 package for surface mounting. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm.
Wemos Lolin 32 ESP32 module and GY-21P module
The GY-21P is a module in that combines a BMP280 sensor and an SI7021 sensor. The on-board BMP280+SI7021 sensor measures atmospheric pressure from 30kPa to 110kPa as well as relative humidity and temperature.
Linkit One and MAX30100 oximetry and heart-rate monitor sensor example
The MAX30100 is an integrated pulse oximetry and heart-rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals.
Linkit one and TCS34725 Color Sensor example
The TCS34725 device provides a digital return of red, green, blue (RGB), and clear light sensing values. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately.
Linkit one and SI7021 Humidity and Temperature Sensor example
The Si7021 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface.
Linkit One and HDC1080 humidity and temperature sensor
The HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.
AM2320 temperature and humidity sensor and an ESP32 module
AM2320 is a simple to use, high performance temperature and humidity sensor capable of long distance signal transmission up to 20 meters.The product also has high reliability and excellent stability.
ESP32 and DHT12 humidity temperature sensor example
The DHt12 is an upgraded version of the DHT11 humidity temperature sensor, it is fully downward compatible, more precise and most importantly it adds an I2C interface.
Connect an LM75 temperature sensor to an ESP32
In this example we will connect an LM75 temperature sensor to an ESP32 module, in this case our favourite Wemos LOLIN32. Lets look at some technical information about the LM75
Linkit One and MMA7660 accelerometer example
How to connect a MMA7660FC accelerometer to a Linkit One
linkit one and GUVA-S12SD UV Sensor example
The GUVA-S12SD UV Sensor chip is suitable for detecting the UV radiation in sunlight. It can be used in any application where you want monitor for the amount of UV light and is simple to connect to any microcontroller
Linkit One and MLX90393 magnetic field sensor example
The MLX90393 magnetic field sensor can be reprogrammed to different modes and with different settings at run-time. The sensor offers a 16-bit output proportional to the magnetic flux density sensed along the XYZ axes using the Melexis proprietary Triaxis® technology and also offers a temperature output signal.
Linkit One and DS1624 sensor example
The DS1624 consists of two separate functional units: a 256-byte nonvolatile E2 memory and a direct-to-digital temperature sensor.